EVO-DMLD demolder
Pneumatic release tooling matched to your reinforced mold and cavity layout.
See the demolderHome / Gummy molds / LFG-008
Illustrative studio visualization of this shape family. Cavity count, dimensions, symbols and construction follow your selected specification; final tooling is confirmed with your quote.
Catalog reference · silicone mold
LFG-008
oval, capsule cavity, 37 × 21.6 × 18.3mm. Reference piece weight 9.2g.
- Piece weight
- 9.2g
- Cavity
- 37 × 21.6 × 18.3mm
- Per deposit cycle
- Checked at quote
Request a quote This reference format requires an individual quote. Custom artwork, new tooling and nonstandard layouts are quoted separately. Final tooling and machine fit are confirmed before production. Payment by ACH or wire; shipping and applicable taxes are separate.
Cavity spacing differs from the 28.6 mm EVOCAN head pitch. We check the fit against your depositor before quoting.
THE CAVITY, IN DETAIL
Plan the shape.
Check the dimensions.
See the flat cavity layout, inspect a cavity and rotate the 3D view. Layouts use the supplied dimensions at one consistent scale. Catalog layouts are nominal references; missing or conflicting specifications are flagged below.
A dimensioned layout is needed to confirm the grid, spacing and cavity orientation. The cavity pattern is not shown.
Specifications.
Piece weight is a reference at the recipe and conditioning noted. Your recipe, Brix and drying change the finished weight.
| Shape | oval, capsule |
|---|---|
| Cavity reference | 37 × 21.6 × 18.3mm |
| Reference piece weight | 9.2g |
| Sheet layout | Catalog strip format · 42mm spacing · cavities per sheet confirmed with quote |
| Cavity pitch | 42mm |
| Construction | All-silicone, or metal-reinforced silicone for the EVO-DMLD demolder |
| Symbol artwork (optional) | Plain, universal THC symbol, or requested symbol artwork, confirmed before tooling |
| Compatible EVOCAN equipment | Tabletop depositor, EVO MDK, EVO30 subject to pitch check |
| Source | Catalog page 4 |
Pairs with.
Order the sheet with the equipment it runs on and we quote them together, checked for fit.
Stainless slip sheets
A firm surface under all-silicone sheets for moving loaded molds between stations.
See slip sheets
Tabletop depositor
Ten nozzles on 28.6 mm pitch, 2 to 10 g per deposit, up to 20 kg an hour.
See the tabletopMore oval & capsule molds.
All gummy moldsLFG-009
8.0g · 35.3 × 20 × 16mm
See the mold
LFG-005
5.2g · Ø27 × 21 × 11.5mm
See the mold4 mL Oval
$150 per standard sheet · 5.2 g estimated · 16.93 × 26.93 × 12.62 mm
See the moldNeed a different weight?
This design can be re-cut to your target piece weight and cavity count. Send the numbers and we return a proof and a per-sheet price.
Reinforced sheets. Meet the demolder.
Pair the metal-reinforced version with the EVO-DMLD and plan release tooling for your cavity layout.